16075 Highway 13 S., Prior Lake, Minnesota 55372 Phone: (952) 440-8778 or FAX (952) 440-8776
HOMEPAGE
PARTS AND ACCESSORIES FOR SALE E-MAIL
JOHN 
Half Ton Accelerator Pedal Ball Studs
We wanted to supply you with an accurate part for your restoration, so we
made these correct accelerator pedal studs.
Now you don't need to use those hex nut threaded types. Peen them in or
tack weld and you are done.
$8.00 each
We also stock the correct pedal! - $42.00
Cab Mounting Blocks
These cab blocks were used on most all Dodge trucks, civilian or military
from the 1940's through the 1950's.
Two wood blocks and four mounting pads per kit.
$24.00/kit
1/2-Ton Dodge WC Top Bow Kit
We discovered a set of original, late 1/2-T top bows in a recent acquisition.
Now we have combined our new wood set with NOS and other reproduction parts
to offer you a complete package. Everything you need is included.
Package Price - $430.00
All parts available separately also. Call for pricing.
WC Top Bow Corner
We just found a stash of NOS WWII Dodge bow corners.
Condition varies from perfect to some needing paint.
We don't have that many, so don't wait.
$22.00
Dodge WC Cable
Finally! A spot-on reproduction of the Dodge choke and throttle cables.
Have not been available for years but we now have them in stock.
A "must" for a high quality restoration. Metal knobs too!
$39.50 each
Clutch Bearing Sleeve
Correct for any Dodge truck. Replace that worn part with this NOS one.
$15.00
Dimmer Switch
USA-made replacement for all WC-series and civilian Power Wagons.
Excellent quality and fit. Screw terminals.
$39.00 each.
Dodge Oversize Brake Shoes
NOS .030 brake shoes for the Dodge trucks.
Now you can use your old, oversize brake drums a little longer.
Correct for all Dodge trucks with the 14" drums.
$28.00 each. Core required.
Dodge Brake Shoe Return Springs
Then end of the NOS parts is here, so we manufactured new springs for
you.
Made from the original OEM print. In stock and ready for shipment.
Fits all 3/4, 1-Ton & 1-1/2 Ton Dodge 4x4 trucks, military and civilian.
$10.00 each.
Dodge 1/2-Ton Gauge Glass
We have had exact copies made of the etched glass for the early civilian-type
square gauges.
These fit all civilian trucks and the 1/2-Ton WC Series. Very limited production!
$50.00/set
Transfer Bolt Hole Plug
These plugs have been requested by our customers for years.
Finally, we've found the correct ones. Used on the transfer case hump.
Fits 3/4 & 1-1/2 Ton trucks.
$2.00 each
Transmission Tunnel Cover Bolts and Clips
We now have the correct special bolt and clips for the transmission
tunnel cover.
Fits all 3/4 & 1-1/2 Ton WC trucks and the civilian Power Wagon. Eight
required.
Clip and Bolt - $4.00/set
Hose Clamps
We now have all the correct sizes in stock for your Dodge restoration.
Dual wire design, correct for WC Series, M37 and Civilian Power Wagons.
All radiator and fuel hose applications.
$3.00 each.
Dodge Water Pump
We have brand new water pumps available for the Dodge truck applications.
These are new, not rebuilt. We have purchased them better so you save!
Compare prices with other retailers and you will find our price to be the
better deal.
$78.00
Fuel Pump Heat Shield
All 1/2 T, 3/4 T, 1-1/2 T, M37 Fuel pumps used a heat shield.
MWM has reproduced all the types used on these trucks to
help you complete your restoration.
$16.00 each.
LU4 Winch Knob & Pin
New MWM repro parts for the MU-2 and the LU-4 winch.
Knob is in aluminum.
Pedal Repair Kit
Now fix your clutch and brake pedals with precision. Ground and polished
brake pedal shaft with a
"True" Oilite bushing. Clutch shaft and bushing are NOS. Items
also available separately.
Kit price - $49.00
Knuckle Seal Parts
We have all the parts needed to repair the steering knuckle of you 3/4,
1-1/2 Ton or Civilian Power Wagon.
Seal Kit - $24.00 each.
Felt Spring - $8.00 each.
Felt Retainer, (not shown) - $25.00 each.
Individual parts are also available separately.
1/2 Ton Knuckle Seal Felt
We now have the correct size felt for the 1/2 Ton knuckles.
$4.50 each.
Wiper Line Kit
Finally, a solution to the often-rusted or missing wiper lines.
Header line and pivot line along with the correct clips to hold them in
place.
Correct for all open cab 3/4 & 1-1/2 Ton WC's.
Kit price - $50.00
Clips - $1.75 each
If you need only one line, call us!
Dodge Starter Pedal
We've reproduced this always-messed-up part.
Replace your worn, sloppy starter plunger
with a new and accurate MWM reproduction.
Correct for all 3/4 and 1-1/2 Ton WC-series Dodges.
$40.00 each.
1/2 Ton Dodge Hand Crank
NOS Engine hand crank for the non-winch model trucks. Part #568949.
Number and the DPCD logo are on the shank.
$55.00
1/2 Ton Dodge Filter
Correct tall filter cartridge for the 1st and 2nd Series trucks with the
T-handle lid.
Keep your truck original by stocking up on these. These are NOT available
commercially any longer.
$9.75 each.
Dodge Hood Pivots
MWM has accurately reproduced the Dodge hood pivots. Die-stamped to
perfection.
Now available--exact-copy screws. We custom-made these as they are not available
commercially.
Pivots, front or rear - $14.00 each
Screws - $2.50 each
WC Dodge Toolbox Lids
Early series 3/4 and 1-1/2 T cargo box lids. Stiffener ribs and all mounting
holes in place.
These lids are attached to the bottom of the troop seat. Front or rear.
Available separately at $24.00 each,
or, as a set of 4 for $80.00.
WC Dodge Toolbox Lid Pull Handle
Late 3/4 & 1-1/2 T front toolbox lid handle.
These are always missing. Attaches to your wooden lid to facilitate easy
opening.
All of the late wood box trucks should have these on both front box lids.
$20.00
Cargo Toolbox Latch
You've asked for these items for years, now we have them for you.
We reproduced the latches for the late WC Dodge toolbox lids.
Correct in every way.
$18.00/set.
Toolbox Supports
These are for the late cargo box only.
These brackets mount on the rear edge of the box to support the toolbox
lids.
Often damaged or missing.
Part #'s CC 931130 and 931131
$20.00 each.
WC Dodge Terminal Strips
We just had these made. Used on WC Dodges and many other WWII trucks.
You can't tell these from originals. Two or three post.
$18.00 each.
3/4 Ton Command Car Battery Box
#1 Quality MWM repro. Same as the original in every way.
We've added powder coat epoxy primer to enhance the quality.
$175.00 each.
Hinge sold separately at $11.00 each.
WC Command Car Battery Splash Pan
This splash pan is almost always missing. Goes between the righthand running
board and the frame to prevent debris from getting to the battery. All it
needs is paint and for you to bolt it on. MWM reproduction.
$35.00 each.
RETURN TO TOP