16075 Highway 13 S., Prior Lake, Minnesota 55372 Phone: (952) 440-8778 or FAX (952) 440-8776
HOMEPAGE
PARTS AND ACCESSORIES FOR SALE E-MAIL
JOHN 
Dodge Cinch Nut
These are the special fasteners used on the Dodge truck floors and fenders.
We had them made so that you can make your restoration perfect. Available
in the 1/4 x 28 and the 5/16 x 24 sizes.
$2.75 each
Steering Wheel Nut
This is the special nut for the 3/4 and 1-1/2 ton Dodge trucks.
Replace that rusted piece with a brand new part made identical to the original.
$5.00 each
WC Muffler
This is an exclusive MWM part. We had these sound and
flow tested against a NOS sample. USA made for superior quality.
Exact dimensions for sure fit and performance.
$77.00 ea.
Open Cab Vent Seal
A nice NOS vent seal for the 3/4 and 1-1/2 ton WC open cab trucks.
Will not fit the closed cabs!
$22.00
WC Dodge Ignition Radio Filterette
For all 3/4 and 1-1/2 Ton WC Dodges. Usually missing or in poor condition.
Now you can add a very nice touch to your restoration by installing a NOS
unit.
A very tough item to find in recent years!
$100.00
Plug Wire Collector
We have a small amount of NOS early collectors in stock from Europe.
For the 1/2, 3/4, and 1-1/2 Ton WC series Dodges.
$48.00
Non-Winch Bumper
It took a while, but we finally succeeded! Now available--a quality, one-piece
front bumper for the 3/4-,
1-1/2 Ton and civilian Power Wagons. No holes to drill! Paint it and install.
$380.00
3/4-Ton Carryall Battery Box Hinge
Never before available! MWM has custom-made these to exact OEM dimensions.
Others have sold on Ebay recently for over $300.00.
Now you can have one just like the original for $90.00. Satisfaction
guaranteed.
Dodge WC 55 37mm Ammo Box Set
We reproduced a small production run of these never-before-available boxes.
Very precise construction. Sold as a set only.
$1200.00
Lower Radiator Pipe and Hose Set
Replace that always-rusted lower radiator pipe with a fresh MWM reproduction.
Can be used for all WWII Dodges. We also have the correct readiator hoses
in stock.
These look like the original WWII wrapped style material, not some cheap
looking replacement.
Pipe - $15.00
Hose Set - $22.00
Hose Clamps - $3.00 ea.
Heat Riser Kit
Heat riser repair kit for all Dodge 230 exhaust manifolds.
Includes shaft, bushings, butterfly and retainer stud.
$38.00
WC54 Rear Step
New, accurate reproduction by Midwest Military.
Correct in all details.
$375.00
Winch Bumper Kit
MWM now offers a complete kit for your winch model WC or Civilian Power
Wagon.
Also available, lower gussets for your non-winch model. Sold in a kit, or
individually.
Kit includes two bumpers and four gussets for $300.00. Gussets separately
- $25.00 each.
1/2 Ton Winch Brackets
USA-made, MWM repro winch mounting brackets for the 1/2 Ton Dodges.
Correct in every way. Paint and install.
$75.00 each.
WC Dodge 1/2 Ton Winch Bumper Set
Get these accurately fitting bumpers for your 1/2 Ton.
We also have the non-winch bumper in stock.
Need gussets? Just ask when ordering your bumpers.
Winch Bumper Set - $90.00/set.
Non-Winch - $100.00.
1/2- and 3/4-Ton Command Car Top Bows
Production is complete! These are exact to the originals
with the correct castings and stamped steel header panel.
We only produced a limited amount. After they are gone we will not be making
more for a few years.
Order yours now. I know it's a big investment but you will NOT be disappointed!
Need individual parts to fix your broken set? Call us.
1/2 & 3/4 Ton Sets - $1500.00
Command Car Top Bow Main Pivot Bolt
We finally found an original sample to re-make them for you.
Replace that threaded bolt with the correct shoulder bolt.
$5.50 each
Command Car Top Bow Handle Wheels
3/4-T and 1/2-T top bows require 2 of these hand wheels to secure the middle
swivel point.
MWM re-cast these to aid in your restoration.
$14.00 each.
Lower Fender Support
These are always rusted out or bent up. Get a new exact-fit part from us.
Also fits the Civilian Power Wagons.
$24.00 each.
Fender Repair Kit
Fix that rusted fender back to nw with our kit. Includes a patch panel to
weld in, outer gusset plate, inner support bracket and rivets to re-attach.
Patch panel and gusset plate are pre-formed to match the curve of the fender.
Correct for all 3/4 Ton, 1-1/2 Ton WC's and Civilian Power Wagons.
$45.00/kit.
Dodge Floor Repair Panel
Need a replacement panel for your M37, Civilian Power Wagon, or WC Dodge?
We can custom make any size panel with any pattern diamond stamping. This
one has the Dodge pattern.
This panel is $18.00. Inexpensive to accurately repair your truck.
Prices vary depending on pattern and size. Call for details.
3/4 Ton WC Dodge Floor Plates
New MWM reproduction floor plates for all
3/4 T, 1-1/2 Ton WC Dodges and Civilian Power Wagons.
Top quality. Exact fit.$175.00/set.
Dodge Floor Pan Screws
We just had these custom made. Produced from an NOS sample.
Dress up your restoration with these screws.
Correct for 3/4 & 1-1/2 Ton WC Dodges, and Civilian Power Wagons.
$1.50 each.
Dodge Floor Hat Channel
We now stock the correct gauge and size hat channel to aid in
your restoration. Sold by the foot. 5' sections are standard.
$8.00/ft.
WC Dodge Wingnut
Here is another MWM product that is not available anywhere else.
This is the correct sheetmetal wingnut for the lazyback arms on all mid-
and late-series open cab Dodges.
Proudly produced by MWM in our shop, not overseas.
$9.00 each.
Dodge Air Horn Gasket
This gasket goes between the air cleaner adaptor and the air horn on all
WC & M37 series trucks.
$4.00 each
RETURN TO TOP