16075 Highway 13 S., Prior Lake, Minnesota 55372 Phone: (952) 440-8778 or FAX (952) 440-8776
HOMEPAGE
PARTS AND ACCESSORIES FOR SALE E-MAIL
JOHN
Steering Column Clamp Welt
We found a good sample and had the late-type column clamp felt made.
These were used when rubber supplies stopped in 1942.
Nice reproduction piece! Correct for 3.4 and 1-1/2 Ton WC Dodges.
$9.50 each.
Dodge Coil Bracket
Correct for all 3/4 Ton WC Series Dodges.
MWM has reproduced this often-missing item that clamps to the steering column.
$18.00
Lockout Hubs
SuperWinch discontinued their hub line. We now get them directly from the
manufacturer. Improved quality too!
Make your truck easier to drive and reduce wear and tear of the front axle.
Get these hubs and install them in about 15 minutes.
All parts needed for an easy installation included. Correct fit for all
3/4 T, 1 T, & 1-1/2 Ton WC series, M37 and Civilian Power Wagons.
$190.00/Set.
Dodge Bumper Bolts
For years we have had requests for the Logo bolts used on the Dodge trucks.
We now have the 1/2" x 1-1/4" bolts available. Custom made to
original look.
Limited availability. Get yours before they are gone.
$4.50 each.
Lower Fender Support Bracket
We've made the late 3/4 and 1-1/2 Ton WC Fender support bracket.
The early types are always broken or welded. Replace yours with a superior
quality part made by MWM.
Fits all model trucks, early or late.
$25.00 each
PTO Lever Lock
Correct for all 1/2-, 3/4-ton WC's and the early Civilian Power Wagon. Made
by MWM.
$20.00
WC Dodge Water Tube
This part is often rusting beyond use. Now, we have a new part that
is plated to extend its service life.
This is an important engine component. Don't compromise your engine life.
Correct for all 218 and 230 CID engines, civilian and military.
$42.00
Glove Box Latch, Knob and Pin
Currently in stock are NOS pin and latch along with a metal repro knob.
The pins and latches are almost always missing or damaged.
Knob - $10.00
Latch - $3.00
Pin - $3.00
WC Dodge Dash Hole Plug
This hole plug is for the late 3/4 and 1-1/2 Ton trucks that had the
extra hole for the voltmeter.
When not used, this plug fills the hole.
$7.00 each.
1/4-Ton Trailer Tandem Hitch Kit
We had several requests for this product. So we made a short batch.
This kit allows you to reinforce the rear crossmember and add another electical
socket so you can tow two trailers in tandem.
$150.00
Dodge Cylinder Head Bolts
NOS tapped head bolts. Used on all Dodge trucks. Can be substituted for
the regular bolts if needed.
$4 ea.
Dodge Knuckle Bearing Cone
We have in stock NOS brass bearing cones for all the 3/4 and 1-1/3 Ton
WC-series Dodges as well as the civilian Power Wagons.
Dodge Carryall Window Clips
We made a small quantity of 1/2- and 3/'4-Ton Carryall rear window clips.
Sold by piece.
$3.50 each.
WC Dodge Header Pipe
MWM is now offering a superior quality product. This pipe is an exact
fit. No more heating and "tweaking" required.
This pipe is mandrel bent so it has a smooth, even radius. Guaranteed satisfaction!
$45.00
Dodge Clutch Kit
Correct fit for all 1/2, 3/4, 1 & 1-1/2 Ton Dodge trucks.
Re-manufactured plate, new disc, pilot bushing, return spring, and throw-out
bearing.
Core required.
Kit - $140.00
1/2 Ton Dodge Drive Shaft with Mechanics U-Joint
NOS Shaft with joints, front or rear, $175.00.
NOS Mechanics U-joint, $90.00 each.
Limited quantity.
Dodge 1/2 Ton 11" Lining Kits
Reline your own shoes with this NOS kit.
One kit per axle.
$17.00/kit.
Front Axle Spindle Bushing
We had these made by the original manufacturer.
Fits all 3/4 Ton Dodge front axle tube & spindles.
$25.00 each.
Military Lug Wrench
Square drive on one end for dual studs. Standard lug nut on the other.
$25.00.
WC Dodge Kick Panel
Replace your damaged and always rusty inner cab kick panel
with these accurate MWM repros. Holes for extinguisher bracket are in the
righthand panel.
$35.00/set
WWII Round Reflectors
USA produced, OEM part. Split lens just like the originals. Primed and painted
lusterless OD.
A "must" to complete your WWII restoration project.
Set of 4 - $40.00
Available individually also.
Reflector Brackets
MWM repro of these often-missing rear reflector brackets.
Correct for all 3/4 Ton WC Command Cars. We also have the 1/2 Ton ones.
$29.00/pair.
1/2 Ton Dodge Reflector Brackets
Another accurate MWM repro part.
Correct for all open and closed cab pickups.$12.00 each.
Dodge Spare Tire Carrier
We stepped up and had the pattern made so you can complete your restoration.
The NOS ones are gone, except for the one used for the pattern.
CC 925324 part number cast in for accuracy.
Mount - $275.00
Stud - $12.00
Cast Plate - $40.00
Wheel Lock - $45.00
Spare Wheel Nut
We had the special spare wheel nut reproduced to
make your restoration more complete and correct.
This is not a lug nut.
$7.50 each.
WWII Antenna Mast Base
Finally available, a totally accurate reproduction of the MP48 mast base.
You can't tell this from NOS! Made from heavy brass just like the original.
Now combine our antenna set with the base to completer your restoration.
MP48 - $210.00
Antenna set - $80.00
WC Dodge Antenna Bracket
Correct antenna mount bracket for all
3/4 Ton Command Cars.
MWM repro.
$40.00 each.
Canvas Tool Bag
These will work for your Jeep, but they are actually slightly larger.
Correct for Dodges, Chev., CCKW's.
$48.00 each.
RETURN TO TOP