16075 Highway 13 S., Prior Lake, Minnesota 55372 Phone: (952) 440-8778 or FAX (952) 440-8776
HOMEPAGE
PARTS AND ACCESSORIES FOR SALE E-MAIL
JOHN 
Spare Tire Lock
We have special permission from the manufacturer to offer a SPECIAL
price to the market.
We want to move these out and you get the benefit! Savings of over 50%.
Includes the correct H700 key.
BLOWOUT PRICE: $24.00 each
Transmission Shift Knob
This knob fits ALL Dodge trucks, halftrack, 2.5-ton and 5-ton trucks as
well as many other WWII vehicles.
Original, USA-made part.
Special Price: $5.00 each
Dodge Wheel Bearing Socket
NOS part that makes working on the wheel hubs a snap.
A must-have tool for any Dodge owner.
Limited supply.
$30.00
Pinion Seal Driver
Another handy tool for the Dodge truck owner.
This is an original NOS part. Used to install the pinion seal on all Dodge
differentials. Makes installation simple.
$30.00
Hand Crank Support
This part is always missing on the WC-series winch model trucks.
The support mounts on the front winch support bracket to stabilize the hand
crank when in use.
A nice detail to finish out your restoration.
$15.00
Crankshaft Pulley
Now available, a NOS crankshaft pulley for the WC series Dodge trucks.
Will also fit the early civilian power wagons.
$125.00
Taillight Doors
We have a variety of manufacturers. Guide, Industrial lamp, CB etc.
All NOS and ready to go. Excellent condition.
$12.00 each
Dodge Rear Main Seals
We are pleased to offer an exclusive solution to the Dodge rear main seal
problem.
New tooling was developed to make a seal that works properly. Top quality!
$35.00
Bell Housing Inspection Hole Plug
Now available is that always-missing plug in the Dodge truck's bell housing.
$3.00
1/2-Ton Taillight Brackets
Almost always missing off the cargo trucks!
Now you can put the correct brackets on you half-ton to make the restoration
complete.
$16.00 each
Jeep and Dodge Head Studs
MWM just had the long studs made here in the USA!
Now in stock and ready for your engine rebuild.
Long Stud - $4.75 each
Short Stud - $3.00 each
Nut - $2.00 each
1/2 Ton Dodge Cargo Bows
USA made, steam bent bows for all cargo 1/2Tons. One-piece construction.
$150.00 for set of 3.
Ridge Pole, (not shown) - $28.00
Ridge Pole Brackets, (not shown) - $6.00 each.
Cargo Cover Strap
A MWM repro for the top bow to cargo cover buckle.
Leather strap, correct metal bracket.
$13.00 each.
WC 1/2-Ton Cargo Box Subframe Kit
All the brackets and wood below the floor - $330.00
Floor kit also available with metal strips and hardware - $425.00
WC Dodge Cargo Box Kit
MWM is offering a complete wood and hardware kit for the late composite
cargo body on the 3/4- and 1-1/2 Ton WC Dodges.
All wood needed, metal floor strips and attaching hardware. We will also
sell component pieces if needed. We offer this kit in either Ash or Oak.
Complete kit - Price on request.
WC Dodge Cargo Floor Wood
The floor wood is available for both the early and late WC cargo bodies.
Kit includes wood, metal strips and all attaching hardware.
This kit is also available for the 6x6 1-1/2 Ton WC.
Floor Kit - $535.00
WC 62-63 Bed Wood
Same type configuration as the 3/4 ton, but longer.
We also make the kit for the late composite cargo box with all
wood sides and wheel house tops.
Call for pricing.
Bed Floor Strips
We are the only company to offer original size and style bed strips for
the Dodge
truck line. These strips take the large head bolt instead of a standard
carriage bolt.
Available for all 1/2, 3/4, and 1-1/2 Ton and civilian Dodge trucks.
Bed side angle strips also available.
1/2 & 3/4 Ton - $24.00 each
1-1/2 Ton - $29.50 each
Bed Bolts and Washers
We can supply the correct length, style and size bolts for your 1/2, 3/4,
or 1-1/2 Ton WC and the M37.
Accurate reproduction washers also available.
Washer Set - $16.00
Bolts - $7.00 each
WC Dodge Rear Crossmember
Accurately made by MWM for all 3/4 T & 1-1/2 T Cargo boxes. This
part has never been available before. Replace your bent, broken pieces with
one that is like an OEM.
$90.00
Cargo Box Floor Supports
These are the two middle supports for the open cab 3/4 T & 1-1/2
T Cargo Box floors. EXACT FIT!
Replace your rusted, beat-up pieces with the new replacement made by MWM.
Sold separately at $40.00 - Short
$48.00 - Long
Cargo Box Extension Panels
Correct front bed panels for the 1/2 ton Dodge cargo box.
Used on all open and closed cab express body trucks. Left and right sides
available.
Only one side shown here.
Small panel - $28.00
Larger Panel - $37.50
Cargo Box Spacers
We had these reproduced to the correct size.
Two thick and four thinner ones required per truck. Correct fo M37 and most
other Dodge trucks.
$28.00/set of six.
Dodge Body Mount Pads
Correct for WC series Dodges and will interchange to the M37.
We added the missing cargo box pad for a more complete WC set.
WC Cargo Set - $44.00
M37 Cargo Set - $35.00
Cab Mount Pds - $2.50 each
Cargo Box Corners
Do you have rusted or damaged corners on your WC weapons carrier? If so,
we can supply you with an accurately made reproduction. We do require your
old dimples to weld into the new structure, so if you don't have them, we
can't make them right. We can make either front or rear corners for your
box, so don't give up on that rusted ol' truck just yet. Call for details
and pricing. These were just made for another customer's truck. One set
for a 3/4 ton and the other was for a WC 62.
RETURN TO TOP