16075 Highway 13 S., Prior Lake, Minnesota 55372 Phone: (952) 440-8778 or FAX (952) 440-8776
PARTS HOMEPAGE VEHICLES
FOR SALE E-MAIL
JOHN 
M-Series Plug Wire Wrench
A handy tool to have in your tool box.
This tool will allow easy removal or installation of the shielded plug wires
on your distributor cap on any M-series vehicle.
$24.00
Distributor Point Plate Kit
This kit contains the small parts to fix your ignition point plate on the
M-series distributors.
Fix those broken or incorrectly replaced spring tabs with this kit. A critical
part of the ignition system that is commonly overlooked!
Kit Price: $5.00
M-Series Distributor Lead
Correct lead for the M37, but can be used on any M-series truck with a distributor.
Replace that frayed wire with a fresh new one.
$29.00
Fender Repair Panel
Right hand battery bump out section.
Always rusted out due to the battery acid.
Fits, MB, GPW, CJ2A, CJ3A jeeps.
$30.00
Shock Bushings
NOS shock bushings for all WWII through late CJ5's applications.
$2.00 each
Cage Nuts and Bolts
We have had these parts for years, but seems our customers didn't know it.
These are the correct 1/4 x 20 bolts and cage nuts for your M-series jeeps.
Bolts are $.40 each
Cage nuts are $.75 each
Jeep and Dodge Head Studs
MWM just had the long studs made here in the USA!
Now in stock and ready for your engine rebuild.
Long Stud - $4.75 each
Short Stud - $3.00 each
Nut - $2.00 each
Glove Box Lock
Finally back in stock! Glove box lock for the M38 and 38A1 Jeeps.
May also be used on the CJ series. Original manufacturer --USA made!
H700 key so you can have some security with your Jeep.
Also available are the correct strikers.
Lock - $24.00
Striker - $6.50
Upper Generator Adjuster Bolt
New MWM product.
Fits ALL 4-cylinder Jeep engines from 1942-1968.
$5.50 each
Wiper Line Clips
Now an accurate reproduction for all of you that asked.
$3.75 each
M38 Fuel Tank Strap Set
You asked for a complete fuel tank strap kit, so here it is.
All 3 pieces needed for your M38. Anti-rattle welt also included. MWM repro.
3-Piece set - $34.00
Transfer Case Shift Lever Boot
Other boots available elsewhere deteriorate in six months, so we decided
to make our own.
Now available, a quality part built to last. Fits CJ2A, CJ3A, M38, M38A1,
CJ3B and CJ5.
Economically priced at $13.00 each.
M38 Generator to Regulator Cable
NOS
$80.00
Jeep Radiator Hoses
Tired of poor quality hoses that crack?
We were too. We have worked with a manufacturer in the USA
to produce these hoses for you. The lower hose for the M38, MB, GPW and
the CJ series
is custom-made from the newest rubber and it also has the wire reinforcement
inside!
Exact fit and quality-tested.We also stock the correct hose clamps.
M38A1 Upper: $18.00
M38A1 Lower: $22.00
M38 Upper: $14.00
M38 Lower: $22.00
Bypass Hose: $9.75
M38 or M38A1 Steering Wheel
Reproduction wheel in black. Nice condition, close to the original.
Can be painted OD to match. Will also work for the CJ2A, CJ3A and CJ5.
$90.00
Jeep Water Pump
We are now stocking USA-made water pumps. Available with the single
groove pulley, or a reconditioned original two groove.
Guaranteed to have your belts run true and the proper fit so the pulley
won't fly off. Core pulley required for the two groove.
Single pulley pump - $60.00
Double pulley pump - CALL for pricing.
Taillight Door
NOS doors for all early M-series trucks. Left side with the red lens. Previously
not available as a separate item.
Now available, door only.
$25.00
Military Hold Downs
Now in stock, NOS hood and windshield hold downs. Right angle and straight
type for your Jeep and Dodge applications.
Will also work for other vehicles.
$14.00
Jeep Body Gusset
This is the special gusset used at the body seam on the CJ2A, 3A, 3B and
M38.
Die-stamped, not hand formed for exact fit.
$14.00
M-Series Jeep Fording Exhaust Stack Support Bracket
We tooled up and made this hard-to-find part.
Exact reproduction.
Bracket - $38.00
Exhaust Stack Pipe, (not shown) - $45.00
Wiper Motor
NOS condition. Very hard to find in recent years. Rebuilds are costing as
much or more than our NOS ones.
We also have arms, blades and acorn nuts in stock.
Motor: $125.00
Jeep Engine Stay Cable
Engine stay cable for the M38 and 38A1. Very nice reproduction.
$20.00
M38 Headlamp Brush Guard
New and improved and now USA-made! Exact fit and form.
$35.00/set
Jeep Master Cylinder Cover Plates
Tired of paying the increasing prices on the import parts?
Now you can purchase a higher quality, USA-made part from us for less money.
Available for either the WWII Jeep or the M38 and A1. Also fits the CJ series
Jeeps!
$14.00 each
Jeep Clutch Parts
All Jeep projects usually require these often-worn parts.
Now you can easily repair your sloppy pedals and get your clutch to adjust
properly.
These fit most Jeeps from 1942-1967.
A495 Pedal Shaft - $32.00
Bracket with Bearing - $40.00
Rod Link - $8.00
Cable & Yoke - $23.00
Cable Boot - $17.50
Cable Boot Adapter - $25.00
Z-Tube - $29.00
Z-Tube Seal Kit - $9.00
Ball Stud - $2.75 each
Pedal Draft Pad Kit
This kit is correct for all post-WWII Jeep clutch and brake pedal applications.
Felt washers have the correct density to provide long lasting life.
$16.00/kit
Jeep Clutch Kit
This kit will fit all 4-cylinder Jeeps from 1942-1965.
Plate, disc, pilot bushing, return spring, throw-out bearing and collar.
Core required.
Package - $175.00
M38 & A1 Seat Pivot Brackets
NOS pivots for the passenger seat.
Our reproduction chains, clips and pins for the pivots.
Pivots, Left or Right - $8.00 ea.
Chain kit - $16.00
Rear Seat Parts
Now you can get all the parts you need to repair or replace those always-missing
components.
Part MWM repro, part NOS.
Call for individual pricing.
M38 Rear Seat J Hooks
A MWM repro of this hard-to-find part. Exact copy of the original.
$16.00